Casing centralization Simulator

The calculations performed within this simulator are based on three-dimensional (3D) centralization modeling and a soft-string analytical approach. The methodologies applied are aligned with the principles and guidance outlined in ISO 10427-2 and API 10D-2 for centralizer placement. Results are provided for engineering evaluation purposes and do not constitute certification or compliance verification.

Evaluate casing standoff, centralizer placement and reach-bottom risk

Enter basic info about the well and simulation date:

Well name

Date

Enter planned or actual survey in (import CSV file)

Format headers as follow

Depth (m)

Tilt (deg)

Azimuth (deg)

Define job as planned or Actual

Upload Well Survey here

Simulation: Required

Planned

Actual

Enter hole size (in) if planned job select hole size if actual enter Caliper file - first column (Depth in meters) second column Hole diameter in inches (import CSV file)

Upload Well Caliper here

Enter casing ID and OD in inches; Nominal weight (lb/ft), Casind depth (m) and mud and cement density (ppg), solid centralizer OD inches or select Bow Spring centralizer type

Casing OD (inches)

Casing nomial weight (lbf/ft)

Current Casing TD (m)

Cement Density (ppg)

Solid centralizer OD (inches)

Casing ID (inches)

Last Casing ID (inches)

Last Casing depth (m)

Mud density (ppg)

Select optimize for standoff of 70% or fixed spacing between centralizers
Hit Run Simulation to start

Optimize for 70% standoff

Fixed spacing (m)